LUGB-99 type vortex flowmeterDetailed product description：

The LUGB-99 vortex flowmeter is a new type of fluid vibration flowmeter based on the Karman vortex principle. It has the advantages of wide measurement range, low pressure loss, stable performance, high accuracy, and easy installation and use; Widely used for measuring the volume and mass flow rate of liquid, gas, and vapor media in closed industrial pipelines.

2、 Functional characteristics and technical parameters
1. Measurement media: steam, gas, liquid.
2. The sensing element of the sensor does not directly contact the measured medium, and its performance is stable and reliable.
3. The sensor has no movable parts inside, a simple and sturdy structure, low pressure loss, small expansion capacity, and long service life.
4. The range is wide from 10:1 to 15:1.
5. Measurement range of vortex flowmeter: normal operating range, Reynolds number is 20000-700000; The output signal is not affected by liquid temperature, pressure, viscosity, and composition. Possible measurement range, Reynolds number 8000-700000.
6. Accuracy level: Liquid, ± 1.0% of indicated value; Gas, with an indication value of ± 1.0%; Steam, with an indication value of ± 1.5%.
7. Output signal: a. Voltage pulse low level: 0-1V; high level: greater than 4V; duty cycle is 50%;
b. Current 4-20mA (three wire system).
8. Power supply voltage:+12VDC; +24VDC。
9. Medium temperature: ordinary type a. -40 ℃~+130 ℃; b.-10℃～+250℃;
High temperature type a. -10 ℃~+350 ℃; b.-10℃～+380℃;
10. Working pressure: 0-2.5Mpa, flange clamping connection (note: other pressure levels can be provided upon user request, customization is required).
11. Pressure loss: Δ P=Δ P=1.079 * 10-6 * ρ * v2 (where Δ P: pressure loss kpa; ρ: The density of the tested medium is kg/m3; V: The flow velocity of the measured medium is m/s.
12. Shell material: carbon steel; Stainless steel (1Cr18Ni9Ti).
13. Specifications (inner diameter of pipeline): 20, 25, 32, 40, 50, 65, 80, 125, 150, 200, 250, 300 (for diameters larger than DN300, insert type).
14. Environmental temperature -25 ℃~+55 ℃; Humidity ≤ 85% RH.
15. Explosion proof type: intrinsic safety type; Explosion proof mark; iaIIcT6。
16. The flow range of the vortex flowmeter under working conditions (unit: m3/h) is shown in the table

DN(mm)	liquid	gas	steam
twenty	0.8-10	5-40	8-80
twenty-five	1-12	7.2-60	10-120
thirty-two	1.5-20	12-100	15-200
forty	2-30	18-150	20-300
fifty	3-50	30-300	30-450
sixty-five	6-80	50-420	60-800
eighty	10-130	70-600	100-1300
one hundred	20-200	120-1000	200-2000
one hundred and twenty-five	30-300	180-1500	300-3000
one hundred and fifty	45-450	240-2000	450-4500
two hundred	90-900	480-4000	900-9000
two hundred and fifty	120-1200	700-8000	1200-12000
three hundred	180-2000	900-10000	1600-16000