LED-99 series intelligent electromagnetic flowmeter is an electromagnetic induction flow meter, which is a high-tech electromechanical product integrating signal detection and microelectronic intelligent technology. It is divided into two categories: on-site display type (integrated type) and remote display type (split type). It can measure the volume flow rate of conductive liquid media, including highly corrosive liquids such as acids, alkalis, salts, pulp, mud, wastewater, and solid-liquid two-phase suspensions. This product is widely used in industries such as petroleum, chemical, metallurgical, textile, food, papermaking, as well as in fields such as environmental protection, municipal management, water conservancy construction, and river dredging.

2、 LED-99 series intelligent electromagnetic flowmeter performance parameters
LED-99 series intelligent electromagnetic flowmeter suitable medium: conductive liquid (including solid-liquid two-phase)
1. Nominal caliber DN10-DN1200
2. Electrode materials: Mo2Ti, Hc, Hb, Ta, Pt
3. Accuracy level: ± 0.3%, ± 0.5%, ± 1.0% (by caliber)
4. Inner lining material: polytetrafluoroethylene F46、 neoprene
5. Electrode forms: fixed, scraper, detachable
6. Dielectric conductivity: a: measured at a low conductivity of not less than 0.1 μ s/cm within a 100 caliber; b: measured at a normal conductivity of not less than 5 μ s/cm
7. Electromagnetic flowmeter flow rate range: 0.3-11m/s
8. Medium temperature: -25 ℃~+180 ℃ (depending on the lining material)
9. Rated pressure: 0.25Mpa-16Mpa (divided by caliber) ≥ 16Mpa is called high pressure type)
10. Connecting flange: According to the national standard GB9115-88 (DIN2051, BS4504)
11. Output signal: 4-20mA current, 0-1kHz frequency RS485　
12. Cable interface: PG10;
13. Protection level: Sensor: IP65, IP67, IP68, Intelligent conversion display: IP65
14. Explosion proof grade: Exmdib IIBT4
15. Installation type: integrated/split type
16. Power supply voltage: 185VAC-265VAC, 18VDC-36VDC;
17. Environmental temperature: Intelligent conversion display: -20 ℃~+50 ℃ Sensor: -30 ℃~+80 ℃
18. Environmental humidity: ≤ 90%
19. Product standard: Q/SOJD03-99 LED-99 series intelligent electromagnetic flowmeter