GVC6013 series electric valveDetailed product description：

The GVC6013 series electric valve is used to control the opening or closing of pipelines in central air conditioning and heating systems, achieving the purpose of controlling room temperature. The control valve is driven by a unidirectional hysteresis synchronous motor with a spring reset. When the valve is not working, it is in a normally closed state. When it needs to work, the temperature controller provides a valve opening signal to connect the electric valve to the AC power supply and activate it. When the valve is opened, chilled water or hot water enters the fan coil unit to provide air conditioning or heating for the room; When the room temperature reaches the set value of the thermostat, the thermostat cuts off the power to the electric valve, and the reset spring closes the valve, thereby cutting off the water flow into the fan coil. By closing and opening the valve, the room temperature is always maintained within the temperature range set by the thermostat.
The GVC6013 series electric valve can be optionally equipped with an auxiliary switch for controlling other equipment; And different connection forms and applicable voltages can be selected to meet different needs.
The GVC6013 series electric valve is flexible in operation, reliable and durable, with low working noise, and can withstand high temperature and high humidity environments commonly found in concealed fan coil units.

Material Description

Valve body material: forged brass
Valve stem material: brass
Sealing material: Nitrile rubber (NBR)
Driver chassis: flame-retardant ABS engineering plastic
Driver cover: flame retardant fiberglass reinforced PA engineering plastic

Product Model	BYD series electric valve	BYD 1 series electric valve
Material	Brass valve body, stainless steel base Aluminum casing	Brass valve body, valve core, sealing butterfly Stainless steel valve stem and spring
Acceptable pressure (MPa)	2.5MPa
Valve body connection	Standard cylindrical pipe thread
Applicable Medium	Frozen water, hot water, or low-pressure steam
Applicable liquid temperature	2℃~105℃
Environmental temperature and humidity	No condensation at 0 ℃~50 ℃
Water flow control method	switch
drive power supply	AC220V (+10%, 15%), 50Hz power consumption ≤ 5W
Motor Category	Hysteresis synchronous motor, speed 500r/min
Total travel time	Turn on for 6 seconds, turn off for 4 seconds	Turn on for 8 seconds, turn off for 5 seconds

GVC6013 series electric valve specifications and main data

Product Model	valve type	connection thread	flow coefficient Kv	Close the pressure differential (MPa)	work medium	fluid temperature	environment temperature	under pressure (MPa)	Electrical Specifications	Storage temperature
VC6013GC21520A4	Normally closed two-way communication	G1/2	two	zero point two five	Freezing/ hot water	2-94℃	＜40℃	two point five	220V (±10%) 50-60Hz	-40- +70℃
VC6013GC22043A4	Normally closed two-way communication	G1/2	three point two	zero point two zero
VC6013GC22032A4	Normally closed two-way communication	G3/4	three point two	zero point two zero
VC6013GC22046A4	Normally closed two-way communication	G3/4	four point six	zero point one five
VC6013GC22557A4	Normally closed two-way communication	G1	five point seven	zero point one zero
VC6013GC22568A4	Normally closed two-way communication	G1	six point eight	zero point zero eight
VC6013GB31532A4	Three-way diverter	G1/2	three point two	zero point one five
VC6013GB32046A4	Three-way diverter	G3/4	four point six	zero point one zero
VC6013GB32557A4	Three-way diverter	G1	five point seven	zero point one zero