ADMAG-AE type electromagnetic flowmeterDetailed product description£º

ADMAG-AE electromagnetic flowmeter

ADMAG AE is an advanced designed electromagnetic flowmeter, which is an improvement of the ADMAG series that has been used and tested on site. The ADMAG AE housing is divided into two chambers, which separate the electrical part from the surrounding area for easy wiring. ADMAG AE adopts dual frequency excitation, with fast response and output noise elimination functions. There are PFA, polyurethane, ceramic and other lining options available, so the application range of electromagnetic flowmeter is very wide.

Basic technical specifications

¡¤Diameter: 2.5, 5, 10, 15, 25, 40, 50, 80, 100, 150, 200 mm
¡¤Excitation method: dual frequency excitation
¡¤Conductivity: diameter over 15mm ªÅ 5 ¦Ì s/cm
¡¤Diameter 2.5~10 mm ªÅ 20 ¦Ì s/cm
¡¤Flow rate range: 0~10 m/s
¡¤Accuracy: ¡À 0.5% of the indicated value (1.0% optional)
¡¤Repeatability: Indicator value 0.1%
¡¤Medium temperature: -10~+180 ¡æ
¡¤Environmental temperature: -20~+60 ¡æ
¡¤Power supply voltage: 220 VAC or 24 VDC
¡¤Fluid pressure: -0.1~4 Mpa
¡¤Output signal: Analog 4~20 mA, pulse, alarm
¡¤Communication: BRAN Communication
¡¤Can provide general and explosion-proof types

Basic performance indicators of ADMAG-AE electromagnetic flowmeter

¡¤Power supply voltage: Accuracy: ¡À 0.5% (¡À 1.0% optional)
¡¤Fluid pressure: Repeatability: 0.1%
¡¤Output signal: Power consumption: ªÆ 14 W (including sensors and converters)
¡¤Insulation resistance: At 500 V DC, the insulation resistance between the power supply and the ground terminal is 100 M ¦¸
At 500 V DC, the insulation resistance between the power supply and the ground terminal is 100 M ¦¸
¡¤Insulation strength: 1500 V AC (withstand 1 minute between power supply and ground terminal)