RAMC Metal Float Flow MeterDetailed product description：

Rotameter RAMC metal float flowmeter

Metal float flowmeter is a product with high technological content, especially in situations where pipeline flow is very low, and has good prospects for use. At present, metal float flowmeters are mainly used in liquid and gas flow and automatic control systems in industries such as petroleum, chemical, steel, power, and textile.
The measurement principle of a metal float flowmeter is a rotor flowmeter with a magnetic steel indicator. The float moves in a specific shaped conical tube with center guidance, independent of the viscosity of the medium. The position of the float is transmitted to the indicator by a magnetic steel. It is equipped with limited contact points and can be used in conjunction with pneumatic or electric transmitters. The display of the indicator corresponds perfectly to the movement of the float. The metal float flowmeter must be installed on a vertical pipeline with the flow direction facing upwards.

Basic technical specifications of RAMC metal float flowmeter

·Tested fluid: liquid or gas
·Range ratio: 10:1
·Accuracy level: 1.5 level (metal cone tube)
·Indicator scale: flow unit or percentage
·Pipeline temperature: -180~+400 ℃ (metal)
·Pipeline connection: flange type
·Material of the liquid receiving part of the medium: SUS316Ti, PTFE
·Shell: Aluminum alloy; Protection: IP65
·On site indicator: T65
·Environmental temperature: -25~+130 ℃
·Attachment: Limit switch
·Electric remote transmission converter: E65, 4~20 mA output signal
·Power supply: 24 VDC
·There are general and explosion-proof types available
·Linear: ≤± 1% FS
·Power supply voltage impact: ≤± 0.1% FS
·Load impact: ≤± 0.1%
·Temperature effect: ± 0.5%/10 K FS
·Wiring port: G1/2, 1/2NPT
·Environmental temperature: -25~+70 ℃
·Optional components: limit switch, accumulator

Basic performance indicators

·Stainless steel pipe, flange, float
·Power supply 24 VDC
·Live remote transmission, output: 4~20 mA
·Produced according to DIN and GB standards