SE Electromagnetic flowmeterDetailed product description£º

SE electromagnetic flowmeter

ADMAG SE is a newly developed electromagnetic flowmeter by Yokogawa Corporation. It has a smaller overall structure, is cheaper, but has high accuracy, and is easy to use and maintain,
The ADMAG SE casing is divided into two chambers, which separate the electrical components from the surrounding area for easy wiring. And it can be equipped with BRAIN or HART communication.

Basic technical specifications of SE electromagnetic flowmeter

¡¤Diameter: 15, 25, 40, 50, 80, 100, 150, 200 mm
¡¤Excitation method: Pulse DC excitation
¡¤Lining: PFA or FEP
¡¤Conductivity: ªÅ 5 ¦Ì s/cm
¡¤Flow rate range: 0~10 m/s
¡¤Accuracy: ¡À 0.5% of the indicated value
¡¤Repeatability: indicated value 0.2%
¡¤Medium temperature: -10~+130 ¡æ
¡¤Environmental temperature: -20~+60 ¡æ
¡¤Power supply voltage: 220 VAC
¡¤Fluid pressure: -0.1~4.0 Mpa
¡¤Output signal: Analog 4~20 mA, pulse, alarm
¡¤Communication: (optional) BRAN Communication
¡¤Power consumption: ªÆ 10 W (including sensors and converters)
¡¤Can provide general and explosion-proof types

Basic performance indicators

¡¤Accuracy: ¡À 0.5%
¡¤Power consumption: ªÆ 10 W (including sensors and converters)
¡¤Insulation resistance: At 500 V DC, the insulation resistance between the power supply and the ground terminal is 100 M ¦¸
¡¤At 500 V DC, the insulation resistance between the power supply and each output terminal is 100 M ¦¸
¡¤Insulation strength: 1500 V AC (withstand 1 minute between power supply and ground terminal)
¡¤Standards required for safety: IEC 1010, EN61010