UHZ-58/S-UK series plug-in magnetic liquid level controllerDetailed product description：

UHZ-58/S-UK series plug-in magnetic liquid level controller

The UKZ-58/S-UK series plug-in magnetic liquid level controller outputs liquid level switch signals, which, when combined with corresponding control circuits, can be used for liquid level control and alarm in various open and closed environments such as petroleum, chemical, textile, printing and dyeing, environmental protection, and civil construction.
This series uses a magnetic float to detect the movement of the reed switch set in the sensor tube as the liquid level drops, and sends out a signal to switch the contact on (off)
This product has a simple structure, easy installation, reliable operation, and easy maintenance. It has a wide range of applications and can be used for liquid level control of various media.
Main technical parameters
Measurement range: 300-6000mm
Accuracy: ± 10mm
Power supply 24VDC
Control contact capacity: AC22O, 1A
DC24V,0.5A
Connection flange: DN100, DN80, PN1.0
Control points: Choose between 1, 2, 3, and 4 points (if more than 4 points are exceeded, please indicate it when placing the order)
Explosion proof mark: Explosion proof ExdB Ⅱ BT4-6 (24VDC only)
Inherent safety type IB Ⅱ CT4
Outgoing interface thread: M20 × 1.5

model	content
UK-101	Single magnetic float, 1 control point
UK-102	Single magnetic float, 2 control points
UK-103	Single magnetic float, 3 control points
UK-104	Single magnetic float, 4 control points
UK-10X	Single magnetic float, X control points
UK-202	2 magnetic floats, 2 control points
UK-303	3 magnetic floats, 4 control points
UK-404	4 magnetic floats, 4 control points
UK-X0X	X magnetic floats, X control points

UHZ-58/S-UK

UHZ-58/S□□

＊-10X

Single magnetic float, X control points

one

304 (connecting flange made of carbon steel)

two

321 connection flange made of stainless steel

three

316L connecting flange made of carbon steel

four

PVC (outer layer fiberglass)

five

PP (stainless steel lining)

six

PTFE (stainless steel lining)

one

Flange connection (flange made of carbon steel)

two

Flange connection (stainless steel flange)

three

Rack mounted fixation

four

Threaded connection, measuring range<500mm, at room temperature and atmospheric pressure

O

No explosion-proof requirements

D

Explosion proof ExdB Ⅱ CT4-6

I

Inherent safety type IB Ⅱ CT4

－

□

Sensor range height (including stiffness dimensions) mm

－

□

K

The first control point from top to bottom is normally open

B

The first control point from top to bottom is normally closed

/□

K

The second control point from top to bottom is normally open

B

The second control point from top to bottom is normally closed

D

Open pressure container

□

Work pressure (MPa)

-

□

Medium density (g/cm3)