EMF201-C Integrated Electromagnetic Flow MeterDetailed product description：

Introduction to EMF201-C Integrated Electromagnetic Flow Meter

Characteristics and Applications
The BACAC series EMF electromagnetic flowmeter is suitable for flow measurement of various conductive liquids, such as tap water, sewage, mud, pulp, various beverages, chemical raw materials, viscous liquids, and suspensions.
The output signal (current, frequency) of EMF is proportional to the volumetric flow rate of the measured fluid, and its measurement results are not affected by the physical properties of the medium such as temperature, pressure, density, conductivity, and operating conditions.
EMF has good adaptability to highly corrosive and abrasive media.
The flow velocity measurement range of EMF is 0-12m/s, and the minimum measurable flow velocity starts from zero. Compared with other types of flow meters, it has good applicability in applications with low flow rates or large flow rate changes.
The EMF lined with FEP can be used for vacuum pipelines.
It has the function of measuring positive/negative bidirectional flow.

Technical specifications of EMF201-C integrated electromagnetic flowmeter product

Technical parameters
Caliber: DN10-2000
Electrode materials: 1. Stainless steel 316L 2. Hastelloy C 3. Hastelloy B 4. Titanium 5. Tantalum
Lining material: chloroprene rubber (Ne): suitable for caliber Φ 50~2000 Polyurethane rubber (Po): suitable for caliber Φ 10~600
Perfluoroethylene propylene (FEP): suitable for diameters ranging from 6 to 300. Polytetrafluoroethylene (PTFE): suitable for diameters ranging from 25 to 1000
Protection category: 1 IP65 2、IP68
Medium temperature: E-grade: -40~70 ℃ M-grade: 70-120 ℃ H-grade: 120-180 ℃
Converter technical performance:
Provide display interfaces in both Chinese and English.
It can directly display forward/reverse instantaneous flow rate, cumulative flow rate, percentage flow rate, and flow velocity by engineering unit.
There are 6 types of flow units to choose from (L/m, L/h, m3/m, m3/h, GPM, GPH).
4-20mADC (load 0~750), scale flow rate (upper limit of range) can be set arbitrarily.
By setting the pulse coefficient, each pulse can represent a certain volume flow rate, or output a 0-2kHz frequency signal proportional to the flow rate.
Provide the function of reporting the upper and lower limits of traffic.
RS485 interface, bidirectional communication. The working parameters of the flowmeter can be set and modified through the upper computer.
When the fluid is stationary, the zero point of the flowmeter can be automatically calibrated through the buttons on the panel.
Damping adjustment can be set within a range of 1 to 99 seconds.
220VAC/24VDC type.
-20~60℃
IP65
Exd(ib)IIBT5