The M9l LCD display indicator consists of a flow accumulator ESKL and an ESK transmitter, which are installed together inside the M9 indicator. The flow accumulator ESk-L is connected to the ESK module through a two-wire system and can generate an instantaneous current of (4-20) mA proportional to the flow rate and independent of the load. The 6-digit LED display can display both the cumulative flow value and the current instantaneous flow value. M9L type liquid crystal display metal rotor flowmeter

Detailed introduction of M9L liquid crystal display metal rotor flowmeter

The M9l LCD display indicator consists of a flow accumulator ESKL and an ESK transmitter, which are installed together inside the M9 indicator. The flow accumulator ESk-L is connected to the ESK module through a two-wire system and can generate an instantaneous current of (4-20) mA proportional to the flow rate and independent of the load.
The 6-digit LED display can display both the cumulative flow value and the current instantaneous flow value. M9L type liquid crystal display metal rotor flowmeter

Power supply: (18-30) V DC
Input signal: (4~21.6) mA relative to 0% to 110% of the measured value
Power consumption: maximum 2W
Maximum load resistance/impedance: (0-720) Ω depends on the magnitude of the supply voltage
Second line system: Rext [V] -14V)/22mA
Environmental temperature: -25C0~+650C

1. Cumulative, instantaneous, and range switching keys
2. Add key
3. Shift key
4. Accumulate reset button