RPP-54/65 series reinforced polypropylene water jet vacuum pumpDetailed product description：

The RPP-54/65 series enhanced polypropylene water jet vacuum pump is mainly used in processes such as vacuum absorption, vacuum filtration, vacuum crystallization, vacuum concentration, vacuum drying, vacuum transportation, vacuum deoxygenation, and vacuum oxygenation. It is an ideal product for extracting modern SZ type water ring and W-type reciprocating vacuum pumps and can be used in parallel. The flange connections need to be symmetrically fastened with even force due to the use of acid resistant rubber gaskets. The screws must be tightened to prevent air leakage. A tailpipe must be connected under the pump body, and its length must not be less than meters. Its diameter: 110 type 2 inches, 180 type 3 inches. The concentricity between the tail pipe and the pump body must be kept perpendicular to ensure its efficiency. If the flow rate of the centrifugal pump is increased, the stiffness limit vacuum degree and exhaust volume will be uniformly increased. It is best to use an 80FP-32 centrifugal pump. To regularly replace the circulating water and prevent water backflow due to unstable voltage, it is best to install an FP-50 check valve.

Performance parameters: